java.lang

## Class Character

- java.lang.Object
- - java.lang.Character

- All Implemented Interfaces:
    Serializable, Comparable<Character>

      public final class Character
      extends Object
      implements Serializable, Comparable<Character>

  The `Character` class wraps a value of the primitive type `char` in an object. An object of type `Character` contains a single field whose type is `char`.

  In addition, this class provides several methods for determining a character's category (lowercase letter, digit, etc.) and for converting characters from uppercase to lowercase and vice versa.

  Character information is based on the Unicode Standard, version 6.0.0.

  The methods and data of class `Character` are defined by the information in the UnicodeData file that is part of the Unicode Character Database maintained by the Unicode Consortium. This file specifies various properties including name and general category for every defined Unicode code point or character range.

  The file and its description are available from the Unicode Consortium at:

  - http://www.unicode.org

  #### Unicode Character Representations

  The `char` data type (and therefore the value that a `Character` object encapsulates) are based on the original Unicode specification, which defined characters as fixed-width 16-bit entities. The Unicode Standard has since been changed to allow for characters whose representation requires more than 16 bits. The range of legal code points is now U+0000 to U+10FFFF, known as Unicode scalar value. (Refer to the definition of the U+n notation in the Unicode Standard.)

  The set of characters from U+0000 to U+FFFF is sometimes referred to as the Basic Multilingual Plane (BMP). Characters whose code points are greater than U+FFFF are called supplementary characters. The Java platform uses the UTF-16 representation in `char` arrays and in the `String` and `StringBuffer` classes. In this representation, supplementary characters are represented as a pair of `char` values, the first from the high-surrogates range, (\uD800-\uDBFF), the second from the low-surrogates range (\uDC00-\uDFFF).

  A `char` value, therefore, represents Basic Multilingual Plane (BMP) code points, including the surrogate code points, or code units of the UTF-16 encoding. An `int` value represents all Unicode code points, including supplementary code points. The lower (least significant) 21 bits of `int` are used to represent Unicode code points and the upper (most significant) 11 bits must be zero. Unless otherwise specified, the behavior with respect to supplementary characters and surrogate `char` values is as follows:

  - The methods that only accept a `char` value cannot support supplementary characters. They treat `char` values from the surrogate ranges as undefined characters. For example, `Character.isLetter('\uD840')` returns `false`, even though this specific value if followed by any low-surrogate value in a string would represent a letter.
  - The methods that accept an `int` value support all Unicode characters, including supplementary characters. For example, `Character.isLetter(0x2F81A)` returns `true` because the code point value represents a letter (a CJK ideograph).

  In the Java SE API documentation, Unicode code point is used for character values in the range between U+0000 and U+10FFFF, and Unicode code unit is used for 16-bit `char` values that are code units of the UTF-16 encoding. For more information on Unicode terminology, refer to the Unicode Glossary.

  Since:
    1.0
  Author:
    Lee Boynton, Guy Steele, Akira Tanaka, Martin Buchholz, Ulf Zibis
  See Also:
    Serialized Form

- - ### Nested Class Summary

    Nested Classes
    Modifier and Type | Class and Description
    --- | ---
    `static class` | `Character.Subset` Instances of this class represent particular subsets of the Unicode character set.

  - ### Field Summary

    Fields
    Modifier and Type | Field and Description
    --- | ---
    `static byte` | `COMBINING_SPACING_MARK` General category "Mc" in the Unicode specification.
    `static byte` | `CONNECTOR_PUNCTUATION` General category "Pc" in the Unicode specification.
    `static byte` | `CONTROL` General category "Cc" in the Unicode specification.
    `static byte` | `CURRENCY_SYMBOL` General category "Sc" in the Unicode specification.
    `static byte` | `DASH_PUNCTUATION` General category "Pd" in the Unicode specification.
    `static byte` | `DECIMAL_DIGIT_NUMBER` General category "Nd" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_ARABIC_NUMBER` Weak bidirectional character type "AN" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_BOUNDARY_NEUTRAL` Weak bidirectional character type "BN" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_COMMON_NUMBER_SEPARATOR` Weak bidirectional character type "CS" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_EUROPEAN_NUMBER` Weak bidirectional character type "EN" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_EUROPEAN_NUMBER_SEPARATOR` Weak bidirectional character type "ES" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_EUROPEAN_NUMBER_TERMINATOR` Weak bidirectional character type "ET" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_LEFT_TO_RIGHT` Strong bidirectional character type "L" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_LEFT_TO_RIGHT_EMBEDDING` Strong bidirectional character type "LRE" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_LEFT_TO_RIGHT_OVERRIDE` Strong bidirectional character type "LRO" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_NONSPACING_MARK` Weak bidirectional character type "NSM" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_OTHER_NEUTRALS` Neutral bidirectional character type "ON" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_PARAGRAPH_SEPARATOR` Neutral bidirectional character type "B" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_POP_DIRECTIONAL_FORMAT` Weak bidirectional character type "PDF" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_RIGHT_TO_LEFT` Strong bidirectional character type "R" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_RIGHT_TO_LEFT_ARABIC` Strong bidirectional character type "AL" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_RIGHT_TO_LEFT_EMBEDDING` Strong bidirectional character type "RLE" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_RIGHT_TO_LEFT_OVERRIDE` Strong bidirectional character type "RLO" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_SEGMENT_SEPARATOR` Neutral bidirectional character type "S" in the Unicode specification.
    `static byte` | `DIRECTIONALITY_UNDEFINED` Undefined bidirectional character type.
    `static byte` | `DIRECTIONALITY_WHITESPACE` Neutral bidirectional character type "WS" in the Unicode specification.
    `static byte` | `ENCLOSING_MARK` General category "Me" in the Unicode specification.
    `static byte` | `END_PUNCTUATION` General category "Pe" in the Unicode specification.
    `static byte` | `FINAL_QUOTE_PUNCTUATION` General category "Pf" in the Unicode specification.
    `static byte` | `FORMAT` General category "Cf" in the Unicode specification.
    `static byte` | `INITIAL_QUOTE_PUNCTUATION` General category "Pi" in the Unicode specification.
    `static byte` | `LETTER_NUMBER` General category "Nl" in the Unicode specification.
    `static byte` | `LINE_SEPARATOR` General category "Zl" in the Unicode specification.
    `static byte` | `LOWERCASE_LETTER` General category "Ll" in the Unicode specification.
    `static byte` | `MATH_SYMBOL` General category "Sm" in the Unicode specification.
    `static int` | `MAX_CODE_POINT` The maximum value of a Unicode code point, constant `U+10FFFF`.
    `static char` | `MAX_HIGH_SURROGATE` The maximum value of a Unicode high-surrogate code unit in the UTF-16 encoding, constant `'\uDBFF'`.
    `static char` | `MAX_LOW_SURROGATE` The maximum value of a Unicode low-surrogate code unit in the UTF-16 encoding, constant `'\uDFFF'`.
    `static int` | `MAX_RADIX` The maximum radix available for conversion to and from strings.
    `static char` | `MAX_SURROGATE` The maximum value of a Unicode surrogate code unit in the UTF-16 encoding, constant `'\uDFFF'`.
    `static char` | `MAX_VALUE` The constant value of this field is the largest value of type `char`, `'\uFFFF'`.
    `static int` | `MIN_CODE_POINT` The minimum value of a Unicode code point, constant `U+0000`.
    `static char` | `MIN_HIGH_SURROGATE` The minimum value of a Unicode high-surrogate code unit in the UTF-16 encoding, constant `'\uD800'`.
    `static char` | `MIN_LOW_SURROGATE` The minimum value of a Unicode low-surrogate code unit in the UTF-16 encoding, constant `'\uDC00'`.
    `static int` | `MIN_RADIX` The minimum radix available for conversion to and from strings.
    `static int` | `MIN_SUPPLEMENTARY_CODE_POINT` The minimum value of a Unicode supplementary code point, constant `U+10000`.
    `static char` | `MIN_SURROGATE` The minimum value of a Unicode surrogate code unit in the UTF-16 encoding, constant `'\uD800'`.
    `static char` | `MIN_VALUE` The constant value of this field is the smallest value of type `char`, `'\u0000'`.
    `static byte` | `MODIFIER_LETTER` General category "Lm" in the Unicode specification.
    `static byte` | `MODIFIER_SYMBOL` General category "Sk" in the Unicode specification.
    `static byte` | `NON_SPACING_MARK` General category "Mn" in the Unicode specification.
    `static byte` | `OTHER_LETTER` General category "Lo" in the Unicode specification.
    `static byte` | `OTHER_NUMBER` General category "No" in the Unicode specification.
    `static byte` | `OTHER_PUNCTUATION` General category "Po" in the Unicode specification.
    `static byte` | `OTHER_SYMBOL` General category "So" in the Unicode specification.
    `static byte` | `PARAGRAPH_SEPARATOR` General category "Zp" in the Unicode specification.
    `static byte` | `PRIVATE_USE` General category "Co" in the Unicode specification.
    `static int` | `SIZE` The number of bits used to represent a `char` value in unsigned binary form, constant `16`.
    `static byte` | `SPACE_SEPARATOR` General category "Zs" in the Unicode specification.
    `static byte` | `START_PUNCTUATION` General category "Ps" in the Unicode specification.
    `static byte` | `SURROGATE` General category "Cs" in the Unicode specification.
    `static byte` | `TITLECASE_LETTER` General category "Lt" in the Unicode specification.
    `static Class<Character>` | `TYPE` The `Class` instance representing the primitive type `char`.
    `static byte` | `UNASSIGNED` General category "Cn" in the Unicode specification.
    `static byte` | `UPPERCASE_LETTER` General category "Lu" in the Unicode specification.

  - ### Constructor Summary

    Constructors
    Constructor and Description
    `Character(char value)` Constructs a newly allocated `Character` object that represents the specified `char` value.

  - ### Method Summary

    All Methods Static Methods Instance Methods Concrete Methods Deprecated Methods
    Modifier and Type | Method and Description
    --- | ---
    `static int` | `charCount(int codePoint)` Determines the number of `char` values needed to represent the specified character (Unicode code point).
    `char` | `charValue()` Returns the value of this `Character` object.
    `static int` | `codePointAt(char[] a, int index)` Returns the code point at the given index of the `char` array.
    `static int` | `codePointAt(char[] a, int index, int limit)` Returns the code point at the given index of the `char` array, where only array elements with `index` less than `limit` can be used.
    `static int` | `codePointAt(CharSequence seq, int index)` Returns the code point at the given index of the `CharSequence`.
    `static int` | `codePointBefore(char[] a, int index)` Returns the code point preceding the given index of the `char` array.
    `static int` | `codePointBefore(char[] a, int index, int start)` Returns the code point preceding the given index of the `char` array, where only array elements with `index` greater than or equal to `start` can be used.
    `static int` | `codePointBefore(CharSequence seq, int index)` Returns the code point preceding the given index of the `CharSequence`.
    `static int` | `codePointCount(char[] a, int offset, int count)` Returns the number of Unicode code points in a subarray of the `char` array argument.
    `static int` | `codePointCount(CharSequence seq, int beginIndex, int endIndex)` Returns the number of Unicode code points in the text range of the specified char sequence.
    `static int` | `compare(char x, char y)` Compares two `char` values numerically.
    `int` | `compareTo(Character anotherCharacter)` Compares two `Character` objects numerically.
    `static int` | `digit(char ch, int radix)` Returns the numeric value of the character `ch` in the specified radix.
    `static int` | `digit(int codePoint, int radix)` Returns the numeric value of the specified character (Unicode code point) in the specified radix.
    `boolean` | `equals(Object obj)` Compares this object against the specified object.
    `static char` | `forDigit(int digit, int radix)` Determines the character representation for a specific digit in the specified radix.
    `static int` | `getNumericValue(char ch)` Returns the `int` value that the specified Unicode character represents.
    `static int` | `getNumericValue(int codePoint)` Returns the `int` value that the specified character (Unicode code point) represents.
    `static int` | `getType(int x)`
    `int` | `hashCode()` Returns a hash code for this `Character`; equal to the result of invoking `charValue()`.
    `static char` | `highSurrogate(int codePoint)` Returns the leading surrogate (a high surrogate code unit) of the surrogate pair representing the specified supplementary character (Unicode code point) in the UTF-16 encoding.
    `static boolean` | `isAlphabetic(int ch)`
    `static boolean` | `isBmpCodePoint(int codePoint)` Determines whether the specified character (Unicode code point) is in the Basic Multilingual Plane (BMP).
    `static boolean` | `isDefined(char ch)` Determines if a character is defined in Unicode.
    `static boolean` | `isDefined(int codePoint)` Determines if a character (Unicode code point) is defined in Unicode.
    `static boolean` | `isDigit(char ch)` Determines if the specified character is a digit.
    `static boolean` | `isDigit(int codePoint)` Determines if the specified character (Unicode code point) is a digit.
    `static boolean` | `isHighSurrogate(char ch)` Determines if the given `char` value is a Unicode high-surrogate code unit (also known as leading-surrogate code unit).
    `static boolean` | `isIdentifierIgnorable(int ch)`
    `static boolean` | `isIdeographic(int ch)`
    `static boolean` | `isISOControl(char ch)` Determines if the specified character is an ISO control character.
    `static boolean` | `isISOControl(int codePoint)` Determines if the referenced character (Unicode code point) is an ISO control character.
    `static boolean` | `isJavaIdentifierPart(char ch)` Determines if the specified character may be part of a Java identifier as other than the first character.
    `static boolean` | `isJavaIdentifierPart(int codePoint)` Determines if the character (Unicode code point) may be part of a Java identifier as other than the first character.
    `static boolean` | `isJavaIdentifierStart(char ch)` Determines if the specified character is permissible as the first character in a Java identifier.
    `static boolean` | `isJavaIdentifierStart(int codePoint)` Determines if the character (Unicode code point) is permissible as the first character in a Java identifier.
    `static boolean` | `isLetter(char ch)` Determines if the specified character is a letter.
    `static boolean` | `isLetter(int codePoint)` Determines if the specified character (Unicode code point) is a letter.
    `static boolean` | `isLetterOrDigit(char ch)` Determines if the specified character is a letter or digit.
    `static boolean` | `isLetterOrDigit(int codePoint)` Determines if the specified character (Unicode code point) is a letter or digit.
    `static boolean` | `isLowerCase(char ch)` Determines if the specified character is a lowercase character.
    `static boolean` | `isLowerCase(int ch)`
    `static boolean` | `isLowSurrogate(char ch)` Determines if the given `char` value is a Unicode low-surrogate code unit (also known as trailing-surrogate code unit).
    `static boolean` | `isMirrored(int ch)`
    `static boolean` | `isSpace(char ch)` Deprecated. Replaced by isWhitespace(char).
    `static boolean` | `isSpaceChar(int ch)`
    `static boolean` | `isSupplementaryCodePoint(int codePoint)` Determines whether the specified character (Unicode code point) is in the supplementary character range.
    `static boolean` | `isSurrogate(char ch)` Determines if the given `char` value is a Unicode surrogate code unit.
    `static boolean` | `isSurrogatePair(char high, char low)` Determines whether the specified pair of `char` values is a valid Unicode surrogate pair.
    `static boolean` | `isTitleCase(char ch)` Determines if the specified character is a titlecase character.
    `static boolean` | `isTitleCase(int codePoint)` Determines if the specified character (Unicode code point) is a titlecase character.
    `static boolean` | `isUnicodeIdentifierPart(int ch)`
    `static boolean` | `isUnicodeIdentifierStart(int ch)`
    `static boolean` | `isUpperCase(char ch)` Determines if the specified character is an uppercase character.
    `static boolean` | `isUpperCase(int ch)`
    `static boolean` | `isValidCodePoint(int codePoint)` Determines whether the specified code point is a valid Unicode code point value.
    `static boolean` | `isWhitespace(char ch)` Determines if the specified character is white space according to Java.
    `static boolean` | `isWhitespace(int codePoint)` Determines if the specified character (Unicode code point) is white space according to Java.
    `static char` | `lowSurrogate(int codePoint)` Returns the trailing surrogate (a low surrogate code unit) of the surrogate pair representing the specified supplementary character (Unicode code point) in the UTF-16 encoding.
    `static int` | `offsetByCodePoints(char[] a, int start, int count, int index, int codePointOffset)` Returns the index within the given `char` subarray that is offset from the given `index` by `codePointOffset` code points.
    `static int` | `offsetByCodePoints(CharSequence seq, int index, int codePointOffset)` Returns the index within the given char sequence that is offset from the given `index` by `codePointOffset` code points.
    `static char` | `reverseBytes(char ch)` Returns the value obtained by reversing the order of the bytes in the specified `char` value.
    `static char[]` | `toChars(int codePoint)` Converts the specified character (Unicode code point) to its UTF-16 representation stored in a `char` array.
    `static int` | `toChars(int codePoint, char[] dst, int dstIndex)` Converts the specified character (Unicode code point) to its UTF-16 representation.
    `static int` | `toCodePoint(char high, char low)` Converts the specified surrogate pair to its supplementary code point value.
    `static char` | `toLowerCase(char ch)` Converts the character argument to lowercase using case mapping information from the UnicodeData file.
    `static int` | `toLowerCase(int ch)`
    `String` | `toString()` Returns a `String` object representing this `Character`'s value.
    `static String` | `toString(char c)` Returns a `String` object representing the specified `char`.
    `static char` | `toUpperCase(char ch)` Converts the character argument to uppercase using case mapping information from the UnicodeData file.
    `static char` | `toUpperCase(int ch)`
    `static Character` | `valueOf(char c)` Returns a `Character` instance representing the specified `char` value.

    - ### Methods inherited from class java.lang.Object

      `clone, finalize, getClass, notify, notifyAll, wait, wait, wait`

- - ### Field Detail

    - #### MIN_RADIX

          public static final int MIN_RADIX

      The minimum radix available for conversion to and from strings. The constant value of this field is the smallest value permitted for the radix argument in radix-conversion methods such as the `digit` method, the `forDigit` method, and the `toString` method of class `Integer`.
      See Also:
        `digit(char, int)`, `forDigit(int, int)`, `Integer.toString(int, int)`, `Integer.valueOf(String)`, Constant Field Values

    - #### MAX_RADIX

          public static final int MAX_RADIX

      The maximum radix available for conversion to and from strings. The constant value of this field is the largest value permitted for the radix argument in radix-conversion methods such as the `digit` method, the `forDigit` method, and the `toString` method of class `Integer`.
      See Also:
        `digit(char, int)`, `forDigit(int, int)`, `Integer.toString(int, int)`, `Integer.valueOf(String)`, Constant Field Values

    - #### MIN_VALUE

          public static final char MIN_VALUE

      The constant value of this field is the smallest value of type `char`, `'\u0000'`.
      Since:
        1.0.2
      See Also:
        Constant Field Values

    - #### MAX_VALUE

          public static final char MAX_VALUE

      The constant value of this field is the largest value of type `char`, `'\uFFFF'`.
      Since:
        1.0.2
      See Also:
        Constant Field Values

    - #### TYPE

          public static final Class<Character> TYPE

      The `Class` instance representing the primitive type `char`.
      Since:
        1.1

    - #### UNASSIGNED

          public static final byte UNASSIGNED

      General category "Cn" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### UPPERCASE_LETTER

          public static final byte UPPERCASE_LETTER

      General category "Lu" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### LOWERCASE_LETTER

          public static final byte LOWERCASE_LETTER

      General category "Ll" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### TITLECASE_LETTER

          public static final byte TITLECASE_LETTER

      General category "Lt" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### MODIFIER_LETTER

          public static final byte MODIFIER_LETTER

      General category "Lm" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### OTHER_LETTER

          public static final byte OTHER_LETTER

      General category "Lo" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### NON_SPACING_MARK

          public static final byte NON_SPACING_MARK

      General category "Mn" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### ENCLOSING_MARK

          public static final byte ENCLOSING_MARK

      General category "Me" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### COMBINING_SPACING_MARK

          public static final byte COMBINING_SPACING_MARK

      General category "Mc" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### DECIMAL_DIGIT_NUMBER

          public static final byte DECIMAL_DIGIT_NUMBER

      General category "Nd" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### LETTER_NUMBER

          public static final byte LETTER_NUMBER

      General category "Nl" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### OTHER_NUMBER

          public static final byte OTHER_NUMBER

      General category "No" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### SPACE_SEPARATOR

          public static final byte SPACE_SEPARATOR

      General category "Zs" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### LINE_SEPARATOR

          public static final byte LINE_SEPARATOR

      General category "Zl" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### PARAGRAPH_SEPARATOR

          public static final byte PARAGRAPH_SEPARATOR

      General category "Zp" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### CONTROL

          public static final byte CONTROL

      General category "Cc" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### FORMAT

          public static final byte FORMAT

      General category "Cf" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### PRIVATE_USE

          public static final byte PRIVATE_USE

      General category "Co" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### SURROGATE

          public static final byte SURROGATE

      General category "Cs" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### DASH_PUNCTUATION

          public static final byte DASH_PUNCTUATION

      General category "Pd" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### START_PUNCTUATION

          public static final byte START_PUNCTUATION

      General category "Ps" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### END_PUNCTUATION

          public static final byte END_PUNCTUATION

      General category "Pe" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### CONNECTOR_PUNCTUATION

          public static final byte CONNECTOR_PUNCTUATION

      General category "Pc" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### OTHER_PUNCTUATION

          public static final byte OTHER_PUNCTUATION

      General category "Po" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### MATH_SYMBOL

          public static final byte MATH_SYMBOL

      General category "Sm" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### CURRENCY_SYMBOL

          public static final byte CURRENCY_SYMBOL

      General category "Sc" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### MODIFIER_SYMBOL

          public static final byte MODIFIER_SYMBOL

      General category "Sk" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### OTHER_SYMBOL

          public static final byte OTHER_SYMBOL

      General category "So" in the Unicode specification.
      Since:
        1.1
      See Also:
        Constant Field Values

    - #### INITIAL_QUOTE_PUNCTUATION

          public static final byte INITIAL_QUOTE_PUNCTUATION

      General category "Pi" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### FINAL_QUOTE_PUNCTUATION

          public static final byte FINAL_QUOTE_PUNCTUATION

      General category "Pf" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_UNDEFINED

          public static final byte DIRECTIONALITY_UNDEFINED

      Undefined bidirectional character type. Undefined `char` values have undefined directionality in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_LEFT_TO_RIGHT

          public static final byte DIRECTIONALITY_LEFT_TO_RIGHT

      Strong bidirectional character type "L" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_RIGHT_TO_LEFT

          public static final byte DIRECTIONALITY_RIGHT_TO_LEFT

      Strong bidirectional character type "R" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_RIGHT_TO_LEFT_ARABIC

          public static final byte DIRECTIONALITY_RIGHT_TO_LEFT_ARABIC

      Strong bidirectional character type "AL" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_EUROPEAN_NUMBER

          public static final byte DIRECTIONALITY_EUROPEAN_NUMBER

      Weak bidirectional character type "EN" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_EUROPEAN_NUMBER_SEPARATOR

          public static final byte DIRECTIONALITY_EUROPEAN_NUMBER_SEPARATOR

      Weak bidirectional character type "ES" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_EUROPEAN_NUMBER_TERMINATOR

          public static final byte DIRECTIONALITY_EUROPEAN_NUMBER_TERMINATOR

      Weak bidirectional character type "ET" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_ARABIC_NUMBER

          public static final byte DIRECTIONALITY_ARABIC_NUMBER

      Weak bidirectional character type "AN" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_COMMON_NUMBER_SEPARATOR

          public static final byte DIRECTIONALITY_COMMON_NUMBER_SEPARATOR

      Weak bidirectional character type "CS" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_NONSPACING_MARK

          public static final byte DIRECTIONALITY_NONSPACING_MARK

      Weak bidirectional character type "NSM" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_BOUNDARY_NEUTRAL

          public static final byte DIRECTIONALITY_BOUNDARY_NEUTRAL

      Weak bidirectional character type "BN" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_PARAGRAPH_SEPARATOR

          public static final byte DIRECTIONALITY_PARAGRAPH_SEPARATOR

      Neutral bidirectional character type "B" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_SEGMENT_SEPARATOR

          public static final byte DIRECTIONALITY_SEGMENT_SEPARATOR

      Neutral bidirectional character type "S" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_WHITESPACE

          public static final byte DIRECTIONALITY_WHITESPACE

      Neutral bidirectional character type "WS" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_OTHER_NEUTRALS

          public static final byte DIRECTIONALITY_OTHER_NEUTRALS

      Neutral bidirectional character type "ON" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_LEFT_TO_RIGHT_EMBEDDING

          public static final byte DIRECTIONALITY_LEFT_TO_RIGHT_EMBEDDING

      Strong bidirectional character type "LRE" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_LEFT_TO_RIGHT_OVERRIDE

          public static final byte DIRECTIONALITY_LEFT_TO_RIGHT_OVERRIDE

      Strong bidirectional character type "LRO" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_RIGHT_TO_LEFT_EMBEDDING

          public static final byte DIRECTIONALITY_RIGHT_TO_LEFT_EMBEDDING

      Strong bidirectional character type "RLE" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_RIGHT_TO_LEFT_OVERRIDE

          public static final byte DIRECTIONALITY_RIGHT_TO_LEFT_OVERRIDE

      Strong bidirectional character type "RLO" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### DIRECTIONALITY_POP_DIRECTIONAL_FORMAT

          public static final byte DIRECTIONALITY_POP_DIRECTIONAL_FORMAT

      Weak bidirectional character type "PDF" in the Unicode specification.
      Since:
        1.4
      See Also:
        Constant Field Values

    - #### MIN_HIGH_SURROGATE

          public static final char MIN_HIGH_SURROGATE

      The minimum value of a Unicode high-surrogate code unit in the UTF-16 encoding, constant `'\uD800'`. A high-surrogate is also known as a leading-surrogate.
      Since:
        1.5
      See Also:
        Constant Field Values

    - #### MAX_HIGH_SURROGATE

          public static final char MAX_HIGH_SURROGATE

      The maximum value of a Unicode high-surrogate code unit in the UTF-16 encoding, constant `'\uDBFF'`. A high-surrogate is also known as a leading-surrogate.
      Since:
        1.5
      See Also:
        Constant Field Values

    - #### MIN_LOW_SURROGATE

          public static final char MIN_LOW_SURROGATE

      The minimum value of a Unicode low-surrogate code unit in the UTF-16 encoding, constant `'\uDC00'`. A low-surrogate is also known as a trailing-surrogate.
      Since:
        1.5
      See Also:
        Constant Field Values

    - #### MAX_LOW_SURROGATE

          public static final char MAX_LOW_SURROGATE

      The maximum value of a Unicode low-surrogate code unit in the UTF-16 encoding, constant `'\uDFFF'`. A low-surrogate is also known as a trailing-surrogate.
      Since:
        1.5
      See Also:
        Constant Field Values

    - #### MIN_SURROGATE

          public static final char MIN_SURROGATE

      The minimum value of a Unicode surrogate code unit in the UTF-16 encoding, constant `'\uD800'`.
      Since:
        1.5
      See Also:
        Constant Field Values

    - #### MAX_SURROGATE

          public static final char MAX_SURROGATE

      The maximum value of a Unicode surrogate code unit in the UTF-16 encoding, constant `'\uDFFF'`.
      Since:
        1.5
      See Also:
        Constant Field Values

    - #### MIN_SUPPLEMENTARY_CODE_POINT

          public static final int MIN_SUPPLEMENTARY_CODE_POINT

      The minimum value of a Unicode supplementary code point, constant `U+10000`.
      Since:
        1.5
      See Also:
        Constant Field Values

    - #### MIN_CODE_POINT

          public static final int MIN_CODE_POINT

      The minimum value of a Unicode code point, constant `U+0000`.
      Since:
        1.5
      See Also:
        Constant Field Values

    - #### MAX_CODE_POINT

          public static final int MAX_CODE_POINT

      The maximum value of a Unicode code point, constant `U+10FFFF`.
      Since:
        1.5
      See Also:
        Constant Field Values

    - #### SIZE

          public static final int SIZE

      The number of bits used to represent a `char` value in unsigned binary form, constant `16`.
      Since:
        1.5
      See Also:
        Constant Field Values

  - ### Constructor Detail

    - #### Character

          public Character(char value)

      Constructs a newly allocated `Character` object that represents the specified `char` value.
      Parameters:
        `value` - the value to be represented by the `Character` object.

  - ### Method Detail

    - #### isAlphabetic

          public static boolean isAlphabetic(int ch)

    - #### isIdeographic

          public static boolean isIdeographic(int ch)

    - #### isLowerCase

          public static boolean isLowerCase(int ch)

    - #### isUpperCase

          public static boolean isUpperCase(int ch)

    - #### isMirrored

          public static boolean isMirrored(int ch)

    - #### isIdentifierIgnorable

          public static boolean isIdentifierIgnorable(int ch)

    - #### isUnicodeIdentifierPart

          public static boolean isUnicodeIdentifierPart(int ch)

    - #### isUnicodeIdentifierStart

          public static boolean isUnicodeIdentifierStart(int ch)

    - #### toUpperCase

          public static char toUpperCase(int ch)

    - #### toLowerCase

          public static int toLowerCase(int ch)

    - #### valueOf

          public static Character valueOf(char c)

      Returns a `Character` instance representing the specified `char` value. If a new `Character` instance is not required, this method should generally be used in preference to the constructor `Character(char)`, as this method is likely to yield significantly better space and time performance by caching frequently requested values. This method will always cache values in the range `'\u0000'` to `'\u007F'`, inclusive, and may cache other values outside of this range.
      Parameters:
        `c` - a char value.
      Returns:
        a `Character` instance representing `c`.
      Since:
        1.5

    - #### charValue

          public char charValue()

      Returns the value of this `Character` object.
      Returns:
        the primitive `char` value represented by this object.

    - #### hashCode

          public int hashCode()

      Returns a hash code for this `Character`; equal to the result of invoking `charValue()`.
      Overrides:
        `hashCode` in class `Object`
      Returns:
        a hash code value for this `Character`
      See Also:
        `Object.equals(java.lang.Object)`, `System.identityHashCode(java.lang.Object)`

    - #### equals

          public boolean equals(Object obj)

      Compares this object against the specified object. The result is `true` if and only if the argument is not `null` and is a `Character` object that represents the same `char` value as this object.
      Overrides:
        `equals` in class `Object`
      Parameters:
        `obj` - the object to compare with.
      Returns:
        `true` if the objects are the same; `false` otherwise.
      See Also:
        `Object.hashCode()`, `HashMap`

    - #### toString

          public String toString()

      Returns a `String` object representing this `Character`'s value. The result is a string of length 1 whose sole component is the primitive `char` value represented by this `Character` object.
      Overrides:
        `toString` in class `Object`
      Returns:
        a string representation of this object.

    - #### toString

          public static String toString(char c)

      Returns a `String` object representing the specified `char`. The result is a string of length 1 consisting solely of the specified `char`.
      Parameters:
        `c` - the `char` to be converted
      Returns:
        the string representation of the specified `char`
      Since:
        1.4

    - #### isValidCodePoint

          public static boolean isValidCodePoint(int codePoint)

      Determines whether the specified code point is a valid Unicode code point value.
      Parameters:
        `codePoint` - the Unicode code point to be tested
      Returns:
        `true` if the specified code point value is between `MIN_CODE_POINT` and `MAX_CODE_POINT` inclusive; `false` otherwise.
      Since:
        1.5

    - #### isBmpCodePoint

          public static boolean isBmpCodePoint(int codePoint)

      Determines whether the specified character (Unicode code point) is in the Basic Multilingual Plane (BMP). Such code points can be represented using a single `char`.
      Parameters:
        `codePoint` - the character (Unicode code point) to be tested
      Returns:
        `true` if the specified code point is between `MIN_VALUE` and `MAX_VALUE` inclusive; `false` otherwise.
      Since:
        1.7

    - #### isSupplementaryCodePoint

          public static boolean isSupplementaryCodePoint(int codePoint)

      Determines whether the specified character (Unicode code point) is in the supplementary character range.
      Parameters:
        `codePoint` - the character (Unicode code point) to be tested
      Returns:
        `true` if the specified code point is between `MIN_SUPPLEMENTARY_CODE_POINT` and `MAX_CODE_POINT` inclusive; `false` otherwise.
      Since:
        1.5

    - #### isHighSurrogate

          public static boolean isHighSurrogate(char ch)

      Determines if the given `char` value is a Unicode high-surrogate code unit (also known as leading-surrogate code unit).

      Such values do not represent characters by themselves, but are used in the representation of supplementary characters in the UTF-16 encoding.

      Parameters:
        `ch` - the `char` value to be tested.
      Returns:
        `true` if the `char` value is between `MIN_HIGH_SURROGATE` and `MAX_HIGH_SURROGATE` inclusive; `false` otherwise.
      Since:
        1.5
      See Also:
        `isLowSurrogate(char)`, `Character.UnicodeBlock.of(int)`

    - #### isLowSurrogate

          public static boolean isLowSurrogate(char ch)

      Determines if the given `char` value is a Unicode low-surrogate code unit (also known as trailing-surrogate code unit).

      Such values do not represent characters by themselves, but are used in the representation of supplementary characters in the UTF-16 encoding.

      Parameters:
        `ch` - the `char` value to be tested.
      Returns:
        `true` if the `char` value is between `MIN_LOW_SURROGATE` and `MAX_LOW_SURROGATE` inclusive; `false` otherwise.
      Since:
        1.5
      See Also:
        `isHighSurrogate(char)`

    - #### isSurrogate

          public static boolean isSurrogate(char ch)

      Determines if the given `char` value is a Unicode surrogate code unit.

      Such values do not represent characters by themselves, but are used in the representation of supplementary characters in the UTF-16 encoding.

      A char value is a surrogate code unit if and only if it is either a low-surrogate code unit or a high-surrogate code unit.

      Parameters:
        `ch` - the `char` value to be tested.
      Returns:
        `true` if the `char` value is between `MIN_SURROGATE` and `MAX_SURROGATE` inclusive; `false` otherwise.
      Since:
        1.7

    - #### isSurrogatePair

          public static boolean isSurrogatePair(char high,
                                                char low)

      Determines whether the specified pair of `char` values is a valid Unicode surrogate pair.

      This method is equivalent to the expression:

      >      isHighSurrogate(high) && isLowSurrogate(low)

      Parameters:
        `high` - the high-surrogate code value to be tested
        `low` - the low-surrogate code value to be tested
      Returns:
        `true` if the specified high and low-surrogate code values represent a valid surrogate pair; `false` otherwise.
      Since:
        1.5

    - #### charCount

          public static int charCount(int codePoint)

      Determines the number of `char` values needed to represent the specified character (Unicode code point). If the specified character is equal to or greater than 0x10000, then the method returns 2. Otherwise, the method returns 1.

      This method doesn't validate the specified character to be a valid Unicode code point. The caller must validate the character value using `isValidCodePoint` if necessary.

      Parameters:
        `codePoint` - the character (Unicode code point) to be tested.
      Returns:
        2 if the character is a valid supplementary character; 1 otherwise.
      Since:
        1.5
      See Also:
        `isSupplementaryCodePoint(int)`

    - #### toCodePoint

          public static int toCodePoint(char high,
                                        char low)

      Converts the specified surrogate pair to its supplementary code point value. This method does not validate the specified surrogate pair. The caller must validate it using `isSurrogatePair` if necessary.
      Parameters:
        `high` - the high-surrogate code unit
        `low` - the low-surrogate code unit
      Returns:
        the supplementary code point composed from the specified surrogate pair.
      Since:
        1.5

    - #### codePointAt

          public static int codePointAt(CharSequence seq,
                                        int index)

      Returns the code point at the given index of the `CharSequence`. If the `char` value at the given index in the `CharSequence` is in the high-surrogate range, the following index is less than the length of the `CharSequence`, and the `char` value at the following index is in the low-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the `char` value at the given index is returned.
      Parameters:
        `seq` - a sequence of `char` values (Unicode code units)
        `index` - the index to the `char` values (Unicode code units) in `seq` to be converted
      Returns:
        the Unicode code point at the given index
      Throws:
        `NullPointerException` - if `seq` is null.
        `IndexOutOfBoundsException` - if the value `index` is negative or not less than `seq.length()`.
      Since:
        1.5

    - #### codePointAt

          public static int codePointAt(char[] a,
                                        int index)

      Returns the code point at the given index of the `char` array. If the `char` value at the given index in the `char` array is in the high-surrogate range, the following index is less than the length of the `char` array, and the `char` value at the following index is in the low-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the `char` value at the given index is returned.
      Parameters:
        `a` - the `char` array
        `index` - the index to the `char` values (Unicode code units) in the `char` array to be converted
      Returns:
        the Unicode code point at the given index
      Throws:
        `NullPointerException` - if `a` is null.
        `IndexOutOfBoundsException` - if the value `index` is negative or not less than the length of the `char` array.
      Since:
        1.5

    - #### codePointAt

          public static int codePointAt(char[] a,
                                        int index,
                                        int limit)

      Returns the code point at the given index of the `char` array, where only array elements with `index` less than `limit` can be used. If the `char` value at the given index in the `char` array is in the high-surrogate range, the following index is less than the `limit`, and the `char` value at the following index is in the low-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the `char` value at the given index is returned.
      Parameters:
        `a` - the `char` array
        `index` - the index to the `char` values (Unicode code units) in the `char` array to be converted
        `limit` - the index after the last array element that can be used in the `char` array
      Returns:
        the Unicode code point at the given index
      Throws:
        `NullPointerException` - if `a` is null.
        `IndexOutOfBoundsException` - if the `index` argument is negative or not less than the `limit` argument, or if the `limit` argument is negative or greater than the length of the `char` array.
      Since:
        1.5

    - #### codePointBefore

          public static int codePointBefore(CharSequence seq,
                                            int index)

      Returns the code point preceding the given index of the `CharSequence`. If the `char` value at `(index - 1)` in the `CharSequence` is in the low-surrogate range, `(index - 2)` is not negative, and the `char` value at `(index - 2)` in the `CharSequence` is in the high-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the `char` value at `(index - 1)` is returned.
      Parameters:
        `seq` - the `CharSequence` instance
        `index` - the index following the code point that should be returned
      Returns:
        the Unicode code point value before the given index.
      Throws:
        `NullPointerException` - if `seq` is null.
        `IndexOutOfBoundsException` - if the `index` argument is less than 1 or greater than `seq.length()`.
      Since:
        1.5

    - #### codePointBefore

          public static int codePointBefore(char[] a,
                                            int index)

      Returns the code point preceding the given index of the `char` array. If the `char` value at `(index - 1)` in the `char` array is in the low-surrogate range, `(index - 2)` is not negative, and the `char` value at `(index - 2)` in the `char` array is in the high-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the `char` value at `(index - 1)` is returned.
      Parameters:
        `a` - the `char` array
        `index` - the index following the code point that should be returned
      Returns:
        the Unicode code point value before the given index.
      Throws:
        `NullPointerException` - if `a` is null.
        `IndexOutOfBoundsException` - if the `index` argument is less than 1 or greater than the length of the `char` array
      Since:
        1.5

    - #### codePointBefore

          public static int codePointBefore(char[] a,
                                            int index,
                                            int start)

      Returns the code point preceding the given index of the `char` array, where only array elements with `index` greater than or equal to `start` can be used. If the `char` value at `(index - 1)` in the `char` array is in the low-surrogate range, `(index - 2)` is not less than `start`, and the `char` value at `(index - 2)` in the `char` array is in the high-surrogate range, then the supplementary code point corresponding to this surrogate pair is returned. Otherwise, the `char` value at `(index - 1)` is returned.
      Parameters:
        `a` - the `char` array
        `index` - the index following the code point that should be returned
        `start` - the index of the first array element in the `char` array
      Returns:
        the Unicode code point value before the given index.
      Throws:
        `NullPointerException` - if `a` is null.
        `IndexOutOfBoundsException` - if the `index` argument is not greater than the `start` argument or is greater than the length of the `char` array, or if the `start` argument is negative or not less than the length of the `char` array.
      Since:
        1.5

    - #### highSurrogate

          public static char highSurrogate(int codePoint)

      Returns the leading surrogate (a high surrogate code unit) of the surrogate pair representing the specified supplementary character (Unicode code point) in the UTF-16 encoding. If the specified character is not a supplementary character, an unspecified `char` is returned.

      If `isSupplementaryCodePoint(x)` is `true`, then `isHighSurrogate``(highSurrogate(x))` and `toCodePoint``(highSurrogate(x),` `lowSurrogate``(x)) == x` are also always `true`.

      Parameters:
        `codePoint` - a supplementary character (Unicode code point)
      Returns:
        the leading surrogate code unit used to represent the character in the UTF-16 encoding
      Since:
        1.7

    - #### lowSurrogate

          public static char lowSurrogate(int codePoint)

      Returns the trailing surrogate (a low surrogate code unit) of the surrogate pair representing the specified supplementary character (Unicode code point) in the UTF-16 encoding. If the specified character is not a supplementary character, an unspecified `char` is returned.

      If `isSupplementaryCodePoint(x)` is `true`, then `isLowSurrogate``(lowSurrogate(x))` and `toCodePoint``(``highSurrogate``(x), lowSurrogate(x)) == x` are also always `true`.

      Parameters:
        `codePoint` - a supplementary character (Unicode code point)
      Returns:
        the trailing surrogate code unit used to represent the character in the UTF-16 encoding
      Since:
        1.7

    - #### toChars

          public static int toChars(int codePoint,
                                    char[] dst,
                                    int dstIndex)

      Converts the specified character (Unicode code point) to its UTF-16 representation. If the specified code point is a BMP (Basic Multilingual Plane or Plane 0) value, the same value is stored in `dst[dstIndex]`, and 1 is returned. If the specified code point is a supplementary character, its surrogate values are stored in `dst[dstIndex]` (high-surrogate) and `dst[dstIndex+1]` (low-surrogate), and 2 is returned.
      Parameters:
        `codePoint` - the character (Unicode code point) to be converted.
        `dst` - an array of `char` in which the `codePoint`'s UTF-16 value is stored.
        `dstIndex` - the start index into the `dst` array where the converted value is stored.
      Returns:
        1 if the code point is a BMP code point, 2 if the code point is a supplementary code point.
      Throws:
        `IllegalArgumentException` - if the specified `codePoint` is not a valid Unicode code point.
        `NullPointerException` - if the specified `dst` is null.
        `IndexOutOfBoundsException` - if `dstIndex` is negative or not less than `dst.length`, or if `dst` at `dstIndex` doesn't have enough array element(s) to store the resulting `char` value(s). (If `dstIndex` is equal to `dst.length-1` and the specified `codePoint` is a supplementary character, the high-surrogate value is not stored in `dst[dstIndex]`.)
      Since:
        1.5

    - #### toChars

          public static char[] toChars(int codePoint)

      Converts the specified character (Unicode code point) to its UTF-16 representation stored in a `char` array. If the specified code point is a BMP (Basic Multilingual Plane or Plane 0) value, the resulting `char` array has the same value as `codePoint`. If the specified code point is a supplementary code point, the resulting `char` array has the corresponding surrogate pair.
      Parameters:
        `codePoint` - a Unicode code point
      Returns:
        a `char` array having `codePoint`'s UTF-16 representation.
      Throws:
        `IllegalArgumentException` - if the specified `codePoint` is not a valid Unicode code point.
      Since:
        1.5

    - #### codePointCount

          public static int codePointCount(CharSequence seq,
                                           int beginIndex,
                                           int endIndex)

      Returns the number of Unicode code points in the text range of the specified char sequence. The text range begins at the specified `beginIndex` and extends to the `char` at index `endIndex - 1`. Thus the length (in `char`s) of the text range is `endIndex-beginIndex`. Unpaired surrogates within the text range count as one code point each.
      Parameters:
        `seq` - the char sequence
        `beginIndex` - the index to the first `char` of the text range.
        `endIndex` - the index after the last `char` of the text range.
      Returns:
        the number of Unicode code points in the specified text range
      Throws:
        `NullPointerException` - if `seq` is null.
        `IndexOutOfBoundsException` - if the `beginIndex` is negative, or `endIndex` is larger than the length of the given sequence, or `beginIndex` is larger than `endIndex`.
      Since:
        1.5

    - #### codePointCount

          public static int codePointCount(char[] a,
                                           int offset,
                                           int count)

      Returns the number of Unicode code points in a subarray of the `char` array argument. The `offset` argument is the index of the first `char` of the subarray and the `count` argument specifies the length of the subarray in `char`s. Unpaired surrogates within the subarray count as one code point each.
      Parameters:
        `a` - the `char` array
        `offset` - the index of the first `char` in the given `char` array
        `count` - the length of the subarray in `char`s
      Returns:
        the number of Unicode code points in the specified subarray
      Throws:
        `NullPointerException` - if `a` is null.
        `IndexOutOfBoundsException` - if `offset` or `count` is negative, or if `offset + count` is larger than the length of the given array.
      Since:
        1.5

    - #### offsetByCodePoints

          public static int offsetByCodePoints(CharSequence seq,
                                               int index,
                                               int codePointOffset)

      Returns the index within the given char sequence that is offset from the given `index` by `codePointOffset` code points. Unpaired surrogates within the text range given by `index` and `codePointOffset` count as one code point each.
      Parameters:
        `seq` - the char sequence
        `index` - the index to be offset
        `codePointOffset` - the offset in code points
      Returns:
        the index within the char sequence
      Throws:
        `NullPointerException` - if `seq` is null.
        `IndexOutOfBoundsException` - if `index` is negative or larger then the length of the char sequence, or if `codePointOffset` is positive and the subsequence starting with `index` has fewer than `codePointOffset` code points, or if `codePointOffset` is negative and the subsequence before `index` has fewer than the absolute value of `codePointOffset` code points.
      Since:
        1.5

    - #### offsetByCodePoints

          public static int offsetByCodePoints(char[] a,
                                               int start,
                                               int count,
                                               int index,
                                               int codePointOffset)

      Returns the index within the given `char` subarray that is offset from the given `index` by `codePointOffset` code points. The `start` and `count` arguments specify a subarray of the `char` array. Unpaired surrogates within the text range given by `index` and `codePointOffset` count as one code point each.
      Parameters:
        `a` - the `char` array
        `start` - the index of the first `char` of the subarray
        `count` - the length of the subarray in `char`s
        `index` - the index to be offset
        `codePointOffset` - the offset in code points
      Returns:
        the index within the subarray
      Throws:
        `NullPointerException` - if `a` is null.
        `IndexOutOfBoundsException` - if `start` or `count` is negative, or if `start + count` is larger than the length of the given array, or if `index` is less than `start` or larger then `start + count`, or if `codePointOffset` is positive and the text range starting with `index` and ending with `start + count - 1` has fewer than `codePointOffset` code points, or if `codePointOffset` is negative and the text range starting with `start` and ending with `index - 1` has fewer than the absolute value of `codePointOffset` code points.
      Since:
        1.5

    - #### isLowerCase

          public static boolean isLowerCase(char ch)

      Determines if the specified character is a lowercase character.

      A character is lowercase if its general category type, provided by `Character.getType(ch)`, is `LOWERCASE_LETTER`, or it has contributory property Other_Lowercase as defined by the Unicode Standard.

      The following are examples of lowercase characters:

      >      a b c d e f g h i j k l m n o p q r s t u v w x y z
      >      '\u00DF' '\u00E0' '\u00E1' '\u00E2' '\u00E3' '\u00E4' '\u00E5' '\u00E6'
      >      '\u00E7' '\u00E8' '\u00E9' '\u00EA' '\u00EB' '\u00EC' '\u00ED' '\u00EE'
      >      '\u00EF' '\u00F0' '\u00F1' '\u00F2' '\u00F3' '\u00F4' '\u00F5' '\u00F6'
      >      '\u00F8' '\u00F9' '\u00FA' '\u00FB' '\u00FC' '\u00FD' '\u00FE' '\u00FF'

      Many other Unicode characters are lowercase too.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `isLowerCase(int)` method.

      Parameters:
        `ch` - the character to be tested.
      Returns:
        `true` if the character is lowercase; `false` otherwise.
      See Also:
        `isLowerCase(char)`, `isTitleCase(char)`, `toLowerCase(char)`, `Character#getType(char)`

    - #### isUpperCase

          public static boolean isUpperCase(char ch)

      Determines if the specified character is an uppercase character.

      A character is uppercase if its general category type, provided by `Character.getType(ch)`, is `UPPERCASE_LETTER`. or it has contributory property Other_Uppercase as defined by the Unicode Standard.

      The following are examples of uppercase characters:

      >      A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
      >      '\u00C0' '\u00C1' '\u00C2' '\u00C3' '\u00C4' '\u00C5' '\u00C6' '\u00C7'
      >      '\u00C8' '\u00C9' '\u00CA' '\u00CB' '\u00CC' '\u00CD' '\u00CE' '\u00CF'
      >      '\u00D0' '\u00D1' '\u00D2' '\u00D3' '\u00D4' '\u00D5' '\u00D6' '\u00D8'
      >      '\u00D9' '\u00DA' '\u00DB' '\u00DC' '\u00DD' '\u00DE'

      Many other Unicode characters are uppercase too.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `isUpperCase(int)` method.

      Parameters:
        `ch` - the character to be tested.
      Returns:
        `true` if the character is uppercase; `false` otherwise.
      Since:
        1.0
      See Also:
        `isLowerCase(char)`, `isTitleCase(char)`, `toUpperCase(char)`, `Character#getType(char)`

    - #### isTitleCase

          public static boolean isTitleCase(char ch)

      Determines if the specified character is a titlecase character.

      A character is a titlecase character if its general category type, provided by `Character.getType(ch)`, is `TITLECASE_LETTER`.

      Some characters look like pairs of Latin letters. For example, there is an uppercase letter that looks like "LJ" and has a corresponding lowercase letter that looks like "lj". A third form, which looks like "Lj", is the appropriate form to use when rendering a word in lowercase with initial capitals, as for a book title.

      These are some of the Unicode characters for which this method returns `true`:

      - `LATIN CAPITAL LETTER D WITH SMALL LETTER Z WITH CARON`
      - `LATIN CAPITAL LETTER L WITH SMALL LETTER J`
      - `LATIN CAPITAL LETTER N WITH SMALL LETTER J`
      - `LATIN CAPITAL LETTER D WITH SMALL LETTER Z`

      Many other Unicode characters are titlecase too.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `isTitleCase(int)` method.

      Parameters:
        `ch` - the character to be tested.
      Returns:
        `true` if the character is titlecase; `false` otherwise.
      Since:
        1.0.2
      See Also:
        `isLowerCase(char)`, `isUpperCase(char)`, `Character#toTitleCase(char)`, `Character#getType(char)`

    - #### isTitleCase

          public static boolean isTitleCase(int codePoint)

      Determines if the specified character (Unicode code point) is a titlecase character.

      A character is a titlecase character if its general category type, provided by `getType(codePoint)`, is `TITLECASE_LETTER`.

      Some characters look like pairs of Latin letters. For example, there is an uppercase letter that looks like "LJ" and has a corresponding lowercase letter that looks like "lj". A third form, which looks like "Lj", is the appropriate form to use when rendering a word in lowercase with initial capitals, as for a book title.

      These are some of the Unicode characters for which this method returns `true`:

      - `LATIN CAPITAL LETTER D WITH SMALL LETTER Z WITH CARON`
      - `LATIN CAPITAL LETTER L WITH SMALL LETTER J`
      - `LATIN CAPITAL LETTER N WITH SMALL LETTER J`
      - `LATIN CAPITAL LETTER D WITH SMALL LETTER Z`

      Many other Unicode characters are titlecase too.

      Parameters:
        `codePoint` - the character (Unicode code point) to be tested.
      Returns:
        `true` if the character is titlecase; `false` otherwise.
      Since:
        1.5
      See Also:
        `isLowerCase(int)`, `isUpperCase(int)`, `Character#toTitleCase(int)`, `getType(int)`

    - #### isDigit

          public static boolean isDigit(char ch)

      Determines if the specified character is a digit.

      A character is a digit if its general category type, provided by `Character.getType(ch)`, is `DECIMAL_DIGIT_NUMBER`.

      Some Unicode character ranges that contain digits:

      - `'\u0030'` through `'\u0039'`, ISO-LATIN-1 digits (`'0'` through `'9'`)
      - `'\u0660'` through `'\u0669'`, Arabic-Indic digits
      - `'\u06F0'` through `'\u06F9'`, Extended Arabic-Indic digits
      - `'\u0966'` through `'\u096F'`, Devanagari digits
      - `'\uFF10'` through `'\uFF19'`, Fullwidth digits
      Many other character ranges contain digits as well.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `isDigit(int)` method.

      Parameters:
        `ch` - the character to be tested.
      Returns:
        `true` if the character is a digit; `false` otherwise.
      See Also:
        `digit(char, int)`, `forDigit(int, int)`, `Character#getType(char)`

    - #### isDigit

          public static boolean isDigit(int codePoint)

      Determines if the specified character (Unicode code point) is a digit.

      A character is a digit if its general category type, provided by `getType(codePoint)`, is `DECIMAL_DIGIT_NUMBER`.

      Some Unicode character ranges that contain digits:

      - `'\u0030'` through `'\u0039'`, ISO-LATIN-1 digits (`'0'` through `'9'`)
      - `'\u0660'` through `'\u0669'`, Arabic-Indic digits
      - `'\u06F0'` through `'\u06F9'`, Extended Arabic-Indic digits
      - `'\u0966'` through `'\u096F'`, Devanagari digits
      - `'\uFF10'` through `'\uFF19'`, Fullwidth digits
      Many other character ranges contain digits as well.
      Parameters:
        `codePoint` - the character (Unicode code point) to be tested.
      Returns:
        `true` if the character is a digit; `false` otherwise.
      Since:
        1.5
      See Also:
        `forDigit(int, int)`, `getType(int)`

    - #### isDefined

          public static boolean isDefined(char ch)

      Determines if a character is defined in Unicode.

      A character is defined if at least one of the following is true:

      - It has an entry in the UnicodeData file.
      - It has a value in a range defined by the UnicodeData file.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `isDefined(int)` method.

      Parameters:
        `ch` - the character to be tested
      Returns:
        `true` if the character has a defined meaning in Unicode; `false` otherwise.
      Since:
        1.0.2
      See Also:
        `isDigit(char)`, `isLetter(char)`, `isLetterOrDigit(char)`, `isLowerCase(char)`, `isTitleCase(char)`, `isUpperCase(char)`

    - #### isDefined

          public static boolean isDefined(int codePoint)

      Determines if a character (Unicode code point) is defined in Unicode.

      A character is defined if at least one of the following is true:

      - It has an entry in the UnicodeData file.
      - It has a value in a range defined by the UnicodeData file.
      Parameters:
        `codePoint` - the character (Unicode code point) to be tested.
      Returns:
        `true` if the character has a defined meaning in Unicode; `false` otherwise.
      Since:
        1.5
      See Also:
        `isDigit(int)`, `isLetter(int)`, `isLetterOrDigit(int)`, `isLowerCase(int)`, `isTitleCase(int)`, `isUpperCase(int)`

    - #### isLetter

          public static boolean isLetter(char ch)

      Determines if the specified character is a letter.

      A character is considered to be a letter if its general category type, provided by `Character.getType(ch)`, is any of the following:

      - `UPPERCASE_LETTER`
      - `LOWERCASE_LETTER`
      - `TITLECASE_LETTER`
      - `MODIFIER_LETTER`
      - `OTHER_LETTER`
      Not all letters have case. Many characters are letters but are neither uppercase nor lowercase nor titlecase.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `isLetter(int)` method.

      Parameters:
        `ch` - the character to be tested.
      Returns:
        `true` if the character is a letter; `false` otherwise.
      See Also:
        `isDigit(char)`, `isJavaIdentifierStart(char)`, `Character#isJavaLetter(char)`, `Character#isJavaLetterOrDigit(char)`, `isLetterOrDigit(char)`, `isLowerCase(char)`, `isTitleCase(char)`, `Character#isUnicodeIdentifierStart(char)`, `isUpperCase(char)`

    - #### isLetter

          public static boolean isLetter(int codePoint)

      Determines if the specified character (Unicode code point) is a letter.

      A character is considered to be a letter if its general category type, provided by `getType(codePoint)`, is any of the following:

      - `UPPERCASE_LETTER`
      - `LOWERCASE_LETTER`
      - `TITLECASE_LETTER`
      - `MODIFIER_LETTER`
      - `OTHER_LETTER`
      Not all letters have case. Many characters are letters but are neither uppercase nor lowercase nor titlecase.
      Parameters:
        `codePoint` - the character (Unicode code point) to be tested.
      Returns:
        `true` if the character is a letter; `false` otherwise.
      Since:
        1.5
      See Also:
        `isDigit(int)`, `isJavaIdentifierStart(int)`, `isLetterOrDigit(int)`, `isLowerCase(int)`, `isTitleCase(int)`, `isUnicodeIdentifierStart(int)`, `isUpperCase(int)`

    - #### isLetterOrDigit

          public static boolean isLetterOrDigit(char ch)

      Determines if the specified character is a letter or digit.

      A character is considered to be a letter or digit if either `Character.isLetter(char ch)` or `Character.isDigit(char ch)` returns `true` for the character.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `isLetterOrDigit(int)` method.

      Parameters:
        `ch` - the character to be tested.
      Returns:
        `true` if the character is a letter or digit; `false` otherwise.
      Since:
        1.0.2
      See Also:
        `isDigit(char)`, `isJavaIdentifierPart(char)`, `Character#isJavaLetter(char)`, `Character#isJavaLetterOrDigit(char)`, `isLetter(char)`, `Character#isUnicodeIdentifierPart(char)`

    - #### isLetterOrDigit

          public static boolean isLetterOrDigit(int codePoint)

      Determines if the specified character (Unicode code point) is a letter or digit.

      A character is considered to be a letter or digit if either `isLetter(codePoint)` or `isDigit(codePoint)` returns `true` for the character.

      Parameters:
        `codePoint` - the character (Unicode code point) to be tested.
      Returns:
        `true` if the character is a letter or digit; `false` otherwise.
      Since:
        1.5
      See Also:
        `isDigit(int)`, `isJavaIdentifierPart(int)`, `isLetter(int)`, `isUnicodeIdentifierPart(int)`

    - #### getType

          public static int getType(int x)

    - #### isJavaIdentifierStart

          public static boolean isJavaIdentifierStart(char ch)

      Determines if the specified character is permissible as the first character in a Java identifier.

      A character may start a Java identifier if and only if one of the following conditions is true:

      - `isLetter(ch)` returns `true`
      - `getType(ch)` returns `LETTER_NUMBER`
      - `ch` is a currency symbol (such as `'$'`)
      - `ch` is a connecting punctuation character (such as `'_'`).

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `isJavaIdentifierStart(int)` method.

      Parameters:
        `ch` - the character to be tested.
      Returns:
        `true` if the character may start a Java identifier; `false` otherwise.
      Since:
        1.1
      See Also:
        `isJavaIdentifierPart(char)`, `isLetter(char)`, `Character#isUnicodeIdentifierStart(char)`, `SourceVersion`

    - #### isJavaIdentifierStart

          public static boolean isJavaIdentifierStart(int codePoint)

      Determines if the character (Unicode code point) is permissible as the first character in a Java identifier.

      A character may start a Java identifier if and only if one of the following conditions is true:

      - `isLetter(codePoint)` returns `true`
      - `getType(codePoint)` returns `LETTER_NUMBER`
      - the referenced character is a currency symbol (such as `'$'`)
      - the referenced character is a connecting punctuation character (such as `'_'`).
      Parameters:
        `codePoint` - the character (Unicode code point) to be tested.
      Returns:
        `true` if the character may start a Java identifier; `false` otherwise.
      Since:
        1.5
      See Also:
        `isJavaIdentifierPart(int)`, `isLetter(int)`, `isUnicodeIdentifierStart(int)`, `SourceVersion`

    - #### isJavaIdentifierPart

          public static boolean isJavaIdentifierPart(char ch)

      Determines if the specified character may be part of a Java identifier as other than the first character.

      A character may be part of a Java identifier if any of the following are true:

      - it is a letter
      - it is a currency symbol (such as `'$'`)
      - it is a connecting punctuation character (such as `'_'`)
      - it is a digit
      - it is a numeric letter (such as a Roman numeral character)
      - it is a combining mark
      - it is a non-spacing mark
      - `isIdentifierIgnorable` returns `true` for the character

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `isJavaIdentifierPart(int)` method.

      Parameters:
        `ch` - the character to be tested.
      Returns:
        `true` if the character may be part of a Java identifier; `false` otherwise.
      Since:
        1.1
      See Also:
        `Character#isIdentifierIgnorable(char)`, `isJavaIdentifierStart(char)`, `isLetterOrDigit(char)`, `Character#isUnicodeIdentifierPart(char)`, `SourceVersion`

    - #### isJavaIdentifierPart

          public static boolean isJavaIdentifierPart(int codePoint)

      Determines if the character (Unicode code point) may be part of a Java identifier as other than the first character.

      A character may be part of a Java identifier if any of the following are true:

      - it is a letter
      - it is a currency symbol (such as `'$'`)
      - it is a connecting punctuation character (such as `'_'`)
      - it is a digit
      - it is a numeric letter (such as a Roman numeral character)
      - it is a combining mark
      - it is a non-spacing mark
      - `isIdentifierIgnorable(codePoint)` returns `true` for the character
      Parameters:
        `codePoint` - the character (Unicode code point) to be tested.
      Returns:
        `true` if the character may be part of a Java identifier; `false` otherwise.
      Since:
        1.5
      See Also:
        `isIdentifierIgnorable(int)`, `isJavaIdentifierStart(int)`, `isLetterOrDigit(int)`, `isUnicodeIdentifierPart(int)`, `SourceVersion`

    - #### toLowerCase

          public static char toLowerCase(char ch)

      Converts the character argument to lowercase using case mapping information from the UnicodeData file.

      Note that `Character.isLowerCase(Character.toLowerCase(ch))` does not always return `true` for some ranges of characters, particularly those that are symbols or ideographs.

      In general, `String.toLowerCase()` should be used to map characters to lowercase. `String` case mapping methods have several benefits over `Character` case mapping methods. `String` case mapping methods can perform locale-sensitive mappings, context-sensitive mappings, and 1:M character mappings, whereas the `Character` case mapping methods cannot.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `toLowerCase(int)` method.

      Parameters:
        `ch` - the character to be converted.
      Returns:
        the lowercase equivalent of the character, if any; otherwise, the character itself.
      See Also:
        `isLowerCase(char)`, `String.toLowerCase()`

    - #### toUpperCase

          public static char toUpperCase(char ch)

      Converts the character argument to uppercase using case mapping information from the UnicodeData file.

      Note that `Character.isUpperCase(Character.toUpperCase(ch))` does not always return `true` for some ranges of characters, particularly those that are symbols or ideographs.

      In general, `String.toUpperCase()` should be used to map characters to uppercase. `String` case mapping methods have several benefits over `Character` case mapping methods. `String` case mapping methods can perform locale-sensitive mappings, context-sensitive mappings, and 1:M character mappings, whereas the `Character` case mapping methods cannot.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `toUpperCase(int)` method.

      Parameters:
        `ch` - the character to be converted.
      Returns:
        the uppercase equivalent of the character, if any; otherwise, the character itself.
      See Also:
        `isUpperCase(char)`, `String.toUpperCase()`

    - #### digit

          public static int digit(char ch,
                                  int radix)

      Returns the numeric value of the character `ch` in the specified radix.

      If the radix is not in the range `MIN_RADIX` ≤ `radix` ≤ `MAX_RADIX` or if the value of `ch` is not a valid digit in the specified radix, `-1` is returned. A character is a valid digit if at least one of the following is true:

      - The method `isDigit` is `true` of the character and the Unicode decimal digit value of the character (or its single-character decomposition) is less than the specified radix. In this case the decimal digit value is returned.
      - The character is one of the uppercase Latin letters `'A'` through `'Z'` and its code is less than `radix + 'A' - 10`. In this case, `ch - 'A' + 10` is returned.
      - The character is one of the lowercase Latin letters `'a'` through `'z'` and its code is less than `radix + 'a' - 10`. In this case, `ch - 'a' + 10` is returned.
      - The character is one of the fullwidth uppercase Latin letters A (`'\uFF21'`) through Z (`'\uFF3A'`) and its code is less than `radix + '\uFF21' - 10`. In this case, `ch - '\uFF21' + 10` is returned.
      - The character is one of the fullwidth lowercase Latin letters a (`'\uFF41'`) through z (`'\uFF5A'`) and its code is less than `radix + '\uFF41' - 10`. In this case, `ch - '\uFF41' + 10` is returned.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `digit(int, int)` method.

      Parameters:
        `ch` - the character to be converted.
        `radix` - the radix.
      Returns:
        the numeric value represented by the character in the specified radix.
      See Also:
        `forDigit(int, int)`, `isDigit(char)`

    - #### digit

          public static int digit(int codePoint,
                                  int radix)

      Returns the numeric value of the specified character (Unicode code point) in the specified radix.

      If the radix is not in the range `MIN_RADIX` ≤ `radix` ≤ `MAX_RADIX` or if the character is not a valid digit in the specified radix, `-1` is returned. A character is a valid digit if at least one of the following is true:

      - The method `isDigit(codePoint)` is `true` of the character and the Unicode decimal digit value of the character (or its single-character decomposition) is less than the specified radix. In this case the decimal digit value is returned.
      - The character is one of the uppercase Latin letters `'A'` through `'Z'` and its code is less than `radix + 'A' - 10`. In this case, `codePoint - 'A' + 10` is returned.
      - The character is one of the lowercase Latin letters `'a'` through `'z'` and its code is less than `radix + 'a' - 10`. In this case, `codePoint - 'a' + 10` is returned.
      - The character is one of the fullwidth uppercase Latin letters A (`'\uFF21'`) through Z (`'\uFF3A'`) and its code is less than `radix + '\uFF21' - 10`. In this case, `codePoint - '\uFF21' + 10` is returned.
      - The character is one of the fullwidth lowercase Latin letters a (`'\uFF41'`) through z (`'\uFF5A'`) and its code is less than `radix + '\uFF41'- 10`. In this case, `codePoint - '\uFF41' + 10` is returned.
      Parameters:
        `codePoint` - the character (Unicode code point) to be converted.
        `radix` - the radix.
      Returns:
        the numeric value represented by the character in the specified radix.
      Since:
        1.5
      See Also:
        `forDigit(int, int)`, `isDigit(int)`

    - #### getNumericValue

          public static int getNumericValue(char ch)

      Returns the `int` value that the specified Unicode character represents. For example, the character `'\u216C'` (the roman numeral fifty) will return an int with a value of 50.

      The letters A-Z in their uppercase (`'\u0041'` through `'\u005A'`), lowercase (`'\u0061'` through `'\u007A'`), and full width variant (`'\uFF21'` through `'\uFF3A'` and `'\uFF41'` through `'\uFF5A'`) forms have numeric values from 10 through 35. This is independent of the Unicode specification, which does not assign numeric values to these `char` values.

      If the character does not have a numeric value, then -1 is returned. If the character has a numeric value that cannot be represented as a nonnegative integer (for example, a fractional value), then -2 is returned.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `getNumericValue(int)` method.

      Parameters:
        `ch` - the character to be converted.
      Returns:
        the numeric value of the character, as a nonnegative `int` value; -2 if the character has a numeric value that is not a nonnegative integer; -1 if the character has no numeric value.
      Since:
        1.1
      See Also:
        `forDigit(int, int)`, `isDigit(char)`

    - #### getNumericValue

          public static int getNumericValue(int codePoint)

      Returns the `int` value that the specified character (Unicode code point) represents. For example, the character `'\u216C'` (the Roman numeral fifty) will return an `int` with a value of 50.

      The letters A-Z in their uppercase (`'\u0041'` through `'\u005A'`), lowercase (`'\u0061'` through `'\u007A'`), and full width variant (`'\uFF21'` through `'\uFF3A'` and `'\uFF41'` through `'\uFF5A'`) forms have numeric values from 10 through 35. This is independent of the Unicode specification, which does not assign numeric values to these `char` values.

      If the character does not have a numeric value, then -1 is returned. If the character has a numeric value that cannot be represented as a nonnegative integer (for example, a fractional value), then -2 is returned.

      Parameters:
        `codePoint` - the character (Unicode code point) to be converted.
      Returns:
        the numeric value of the character, as a nonnegative `int` value; -2 if the character has a numeric value that is not a nonnegative integer; -1 if the character has no numeric value.
      Since:
        1.5
      See Also:
        `forDigit(int, int)`, `isDigit(int)`

    - #### isSpace

          @Deprecated
          public static boolean isSpace(char ch)

      Deprecated. Replaced by isWhitespace(char).
      Determines if the specified character is ISO-LATIN-1 white space. This method returns `true` for the following five characters only:

      `'\t'` | `U+0009` | `HORIZONTAL TABULATION`
      `'\n'` | `U+000A` | `NEW LINE`
      `'\f'` | `U+000C` | `FORM FEED`
      `'\r'` | `U+000D` | `CARRIAGE RETURN`
      `'&nbsp;'` | `U+0020` | `SPACE`

      Parameters:
        `ch` - the character to be tested.
      Returns:
        `true` if the character is ISO-LATIN-1 white space; `false` otherwise.
      See Also:
        `Character#isSpaceChar(char)`, `isWhitespace(char)`

    - #### isSpaceChar

          public static boolean isSpaceChar(int ch)

    - #### isWhitespace

          public static boolean isWhitespace(char ch)

      Determines if the specified character is white space according to Java. A character is a Java whitespace character if and only if it satisfies one of the following criteria:
      - It is a Unicode space character (`SPACE_SEPARATOR`, `LINE_SEPARATOR`, or `PARAGRAPH_SEPARATOR`) but is not also a non-breaking space (`'\u00A0'`, `'\u2007'`, `'\u202F'`).
      - It is `'\t'`, U+0009 HORIZONTAL TABULATION.
      - It is `'\n'`, U+000A LINE FEED.
      - It is `'\u000B'`, U+000B VERTICAL TABULATION.
      - It is `'\f'`, U+000C FORM FEED.
      - It is `'\r'`, U+000D CARRIAGE RETURN.
      - It is `'\u001C'`, U+001C FILE SEPARATOR.
      - It is `'\u001D'`, U+001D GROUP SEPARATOR.
      - It is `'\u001E'`, U+001E RECORD SEPARATOR.
      - It is `'\u001F'`, U+001F UNIT SEPARATOR.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `isWhitespace(int)` method.

      Parameters:
        `ch` - the character to be tested.
      Returns:
        `true` if the character is a Java whitespace character; `false` otherwise.
      Since:
        1.1
      See Also:
        `Character#isSpaceChar(char)`

    - #### isWhitespace

          public static boolean isWhitespace(int codePoint)

      Determines if the specified character (Unicode code point) is white space according to Java. A character is a Java whitespace character if and only if it satisfies one of the following criteria:
      - It is a Unicode space character (`SPACE_SEPARATOR`, `LINE_SEPARATOR`, or `PARAGRAPH_SEPARATOR`) but is not also a non-breaking space (`'\u00A0'`, `'\u2007'`, `'\u202F'`).
      - It is `'\t'`, U+0009 HORIZONTAL TABULATION.
      - It is `'\n'`, U+000A LINE FEED.
      - It is `'\u000B'`, U+000B VERTICAL TABULATION.
      - It is `'\f'`, U+000C FORM FEED.
      - It is `'\r'`, U+000D CARRIAGE RETURN.
      - It is `'\u001C'`, U+001C FILE SEPARATOR.
      - It is `'\u001D'`, U+001D GROUP SEPARATOR.
      - It is `'\u001E'`, U+001E RECORD SEPARATOR.
      - It is `'\u001F'`, U+001F UNIT SEPARATOR.

      Parameters:
        `codePoint` - the character (Unicode code point) to be tested.
      Returns:
        `true` if the character is a Java whitespace character; `false` otherwise.
      Since:
        1.5
      See Also:
        `isSpaceChar(int)`

    - #### isISOControl

          public static boolean isISOControl(char ch)

      Determines if the specified character is an ISO control character. A character is considered to be an ISO control character if its code is in the range `'\u0000'` through `'\u001F'` or in the range `'\u007F'` through `'\u009F'`.

      Note: This method cannot handle supplementary characters. To support all Unicode characters, including supplementary characters, use the `isISOControl(int)` method.

      Parameters:
        `ch` - the character to be tested.
      Returns:
        `true` if the character is an ISO control character; `false` otherwise.
      Since:
        1.1
      See Also:
        `Character#isSpaceChar(char)`, `isWhitespace(char)`

    - #### isISOControl

          public static boolean isISOControl(int codePoint)

      Determines if the referenced character (Unicode code point) is an ISO control character. A character is considered to be an ISO control character if its code is in the range `'\u0000'` through `'\u001F'` or in the range `'\u007F'` through `'\u009F'`.
      Parameters:
        `codePoint` - the character (Unicode code point) to be tested.
      Returns:
        `true` if the character is an ISO control character; `false` otherwise.
      Since:
        1.5
      See Also:
        `isSpaceChar(int)`, `isWhitespace(int)`

    - #### forDigit

          public static char forDigit(int digit,
                                      int radix)

      Determines the character representation for a specific digit in the specified radix. If the value of `radix` is not a valid radix, or the value of `digit` is not a valid digit in the specified radix, the null character (`'\u0000'`) is returned.

      The `radix` argument is valid if it is greater than or equal to `MIN_RADIX` and less than or equal to `MAX_RADIX`. The `digit` argument is valid if `0 <= digit < radix`.

      If the digit is less than 10, then `'0' + digit` is returned. Otherwise, the value `'a' + digit - 10` is returned.

      Parameters:
        `digit` - the number to convert to a character.
        `radix` - the radix.
      Returns:
        the `char` representation of the specified digit in the specified radix.
      See Also:
        `MIN_RADIX`, `MAX_RADIX`, `digit(char, int)`

    - #### compareTo

          public int compareTo(Character anotherCharacter)

      Compares two `Character` objects numerically.
      Specified by:
        `compareTo` in interface `Comparable<Character>`
      Parameters:
        `anotherCharacter` - the `Character` to be compared.
      Returns:
        the value `0` if the argument `Character` is equal to this `Character`; a value less than `0` if this `Character` is numerically less than the `Character` argument; and a value greater than `0` if this `Character` is numerically greater than the `Character` argument (unsigned comparison). Note that this is strictly a numerical comparison; it is not locale-dependent.
      Since:
        1.2

    - #### compare

          public static int compare(char x,
                                    char y)

      Compares two `char` values numerically. The value returned is identical to what would be returned by:

              Character.valueOf(x).compareTo(Character.valueOf(y))

      Parameters:
        `x` - the first `char` to compare
        `y` - the second `char` to compare
      Returns:
        the value `0` if `x == y`; a value less than `0` if `x < y`; and a value greater than `0` if `x > y`
      Since:
        1.7

    - #### reverseBytes

          public static char reverseBytes(char ch)

      Returns the value obtained by reversing the order of the bytes in the specified `char` value.
      Returns:
        the value obtained by reversing (or, equivalently, swapping) the bytes in the specified `char` value.
      Since:
        1.5

Copyright © 2025 API Design. All Rights Reserved.